AJAX – DoorProtect Plus, Wireless Opening Detector w/ Shock & Tilt Sensor
Wireless opening detector that notifies broken door or window. It can be mounted on all types of doors including a metal base.
- Authentication to prevent forgery
- Jamming detection and communication channels encryption
- Tampering alarm
- Security Grade
- Registers change in vertical slope angle, bangs and vibration
- Operates up to 5 years without battery replacement
- External contact is available for connecting third-party detectors
Principle of operation
The device detects the door or window being opened. It can operate in the transmitter mode, sending a signal from the wired sensor to the hub.
The device protects even windows left open for ventilation. The accelerometer registers changes in vertical slope angle, bangs or vibration and sends an alarm to the hub.
Installation and set up
Ready to operate straight out the box: the battery is already installed.
|Detector actuation threshold
|1 cm (small magnet)
2 cm (big magnet)
|Tilt sensor activation threshold
|5° or more (customizable)
|Ignore first shock option
|868.0 – 868.6 MHz or 868.7 – 869.2 MHz depending on the region of sale
|Operates only with all Ajax hubs, and range extenders
|Maximum RF output power
|Up to 20 mW
|Modulation of the radio signal
|Radio signal range
|Up to 1,200 m (any obstacles absent)
|Socket for connecting wire detectors
|1 battery CR123A, 3 V
|Up to 5 years
|Operating temperature range
|From -10°С to +40°С
|Up to 75%
|Ø 20 × 90 mm
|Security Grade 2, Environmental Class II in conformity with the requirements of EN 50131-1, EN 50131-2-6, CLC/TS-50131-2-8, EN 50131-5-3
Only logged in customers who have purchased this product may leave a review.
Questions and answers of the customers
There are no questions yet, be the first to ask something for this product.