AJAX – 18 Zone Multi-Transmitter Module for third-party detector integration
Security via smartphone
Switch to smart protection while keeping your old security equipment.
The second life of a wired alarm
MultiTransmitter replaces the old security control panel, providing connection to the Ajax system via Jeweller radio protocol.
More Ajax features
IR barriers, household gas, temperature, liquid level detectors, and other devices are ready to expand the Ajax areas of use.
Multitasking in a single body
|Number of alarm/tamper zones
|Supported detector contact types
|NO, NC (without R), EOL (NC with R), EOL (NO with R)
|Resistance of the EOL Resistor
|From 1 kΩ to 7.5 kΩ
|Alarm signals processing mode
|Pulsed or bistable
|Main power supply
|110–255 V, 50/60 Hz
|12 V DC
|Supported battery type
|12 V battery with a full charge cycle of up to 30 hours. The maximum battery size for installation in the body is 150 × 64 × 94 mm
|Recommended battery type
|12V battery with a capacity of 4 or 7 A⋅h
|Detector power supply
|12 V DC, up to 1 A total for all detector power supply outputs
|Protection against dismantling
|Radio signal frequency band
|868.0–868.6 MHz or 868.7–869.2 MHz, depending on the sales region
|Operates only with all Ajax hubs, and range extenders
|Maximum RF output power
|Up to 7.29 mW (25 mW limit)
|Radio signal range
|Up to 2,000 m (any obstacles absent)
|Operating temperature range
|From −10°С to +40°С
|Up to 75%
|196 × 238 × 100 mm
Only logged in customers who have purchased this product may leave a review.
Questions and answers of the customers
There are no questions yet, be the first to ask something for this product.